On Sat, 31 Aug 2013 12:28:26 -0600, hamilton
wrote:
On 8/20/2013 3:12 PM, Guv Bob wrote:
Names can be confusing, so here's what I'm doing....
http://img43.imageshack.us/img43/7434/wvm.gif
When 12VDC is applied to the input, I need a 12VDC output for 5 seconds. Then output will go back off and stay off until the input goes to zero. Then cycle starts again.
Current for both legs is in the 10-50ma range.
A simple on-delay timer would work but I'm having trouble finding one with NC contacts. Tons of stuff $100+, but for this application, it has to be under $20.
http://www.ebay.com/itm/New-DC-12V-D...51330081051%26
---
I couldn't find the spec's for the switch; do you have a link?
--
JF