On 31/08/2013 09:12, The Medway Handyman wrote:
On 31/08/2013 00:32, ss wrote:
On 30/08/2013 22:36, Dave W wrote:
On Fri, 30 Aug 2013 12:13:05 +0100, wrote:

Trying to replace the washer but having problems getting the tap apart.
I have managed to get the handle off but now need to get the cover (as
indicated in the pic) off. I have tried screwing and also tapping it
upwards to try and dislodge it, to no avail.
Anyone know if its a screw fit or just sits in position or any ideas
how
to get it off.

http://i64.photobucket.com/albums/h1...ps25b2960f.jpg

You could try hammering all round the rim to break up the limescale
before trying to unscrew the top.

Already tried that, think if all else fails I may try something
new.....fit a chisel to my SDS and pad the end and pulverise the cover
and see what happens. After tomorrow the cosmetic aspect will be
diminished ...I will be refurbishing the bathroom within 2 years so
desperation may prevail. :-)

A few seconds with a blow torch sometimes helps.


Update...

Got the sleeve loosened eventually had to use mole grips, also got the
valve loosened in its seat.
Now to tackle the other tap (hot) may be more of a challenge as the nut
under the sink that tightens it to the basin has snapped off (plastic)
so will have to careful of not doing some pipe damage with twisting. The
center part that hides the screw to take the tap off is locked tight so
......here we go again. Nothing is ever straightforward.