Leon wrote:
"G. wrote:
A couple of bowls I recently finished.

--
 GW Ross 

 Attention: Mu'ad Dib, your sandworm, 
 124C, is blocking the driveway. 

Very nice? I hope to one day turn bowls, providing you don't scare me off
with my asking you how many approximate hours, start to finish. :-)
Cutting down tree, sawing into 18" blocks, sawing blocks lengthwise
twice to cut out pith=1 day with sharp saws.
Cutting circle out of blank, rough turning it=45 min.
Drying in paper bag until weight loss stops=2-5 months. I weigh them
every 2 weeks. This morning's weighing yielded 12 large rough bowls
which weighed the same or slightly more than last weighing. They were
roughed out in Feb.
Finish turning large bowl with sanding to 600 grit =1 day. finishing
top, reversing on vacuum chuck and finishing bottom=1-2 hr. The reason
I can't finish it all in 1 day is that I put on LV tung oil sealer
after sanding. It takes overnight before can do the shellac/wax
finish. The tung oil brings out the grain.
Hauling off off-cuts, shavings and sanding dust--continuous.
Sharpening tools on belt sander--every 5 minutes.
Seeing smile on SWMBO's face--priceless.
--
 GW Ross 

 Do not call up that which you cannot 
 put on hold.