On 5/14/2013 10:43 AM, Karl Townsend wrote:
I need to install a diswasher drain line into an existing 1 1/2" white
plastic drain line. The line is all glued in place with no give. There
is a place where a foot or so can be cut out but no way to move side
to side.

Surely some part is made to solve this issue. What do I need?

Karl



If you can't find one, cut a hole in the line with a hole saw. Cut a
"T" in half lengthwise and remove any protrusions and glue and hose
clamp in place.