Thread: Any Hams here?
View Single Post
  #74   Report Post  
Posted to rec.crafts.metalworking
jon_banquer[_2_] jon_banquer[_2_] is offline
external usenet poster
 
Posts: 3,797
Default Any Hams here?

On Mar 25, 7:27*am, "Michael A. Terrell"
wrote:
Gunner Asch wrote:

On Sun, 24 Mar 2013 02:51:54 -0400, "Michael A. Terrell"
wrote:


"DoN. Nichols" wrote:


On 2013-03-20, Lloyd E. Sponenburgh lloydspinsidemindspring.com wrote:
Gunner fired this volley in
:


Anyone got a 50 ohm, 100 watt dummy load collecting dust I can
swap/trade for?


An incandescent lamp isn't perfect, but works.


* * * * Even better -- mount it in a gallon paint can, with a good RF
connector in the lid -- and oil inside to carry the heat from the lamp
to the walls of the can for cooling.


* * * * The higher the frequency, the more that lamp will differ from
the proper impedance -- with all those little curly Tungsten wires as
the filament. *But the can will at least keep the RF from radiating.
The main risk with a poor impedance match would be damage to the final
of the transmitter.


* * * * Anyone ever have a Heathkit "Cantenna"? *Was it an array of
carbon resistors in oil, or an incandescent lamp? *The former would be
more constant impedance, at least.


* Don, they used a 200 watt 50 ohm carborundum non-inductive oil
treated resistor immersed in transformer oil.
http://www.orcadxcc.org/content/cantenna_va7jw.pdf


Can anyone suggest an inexpensive radio for Technician class?


Ive been told that the Icom 706, the Yaesu 817 and 857s would fit my
needs..but they are more ..in some cases...far far more expensive than
I can afford this year.


The TS-520SE that I have has some "issues" that Im going to need to
resolve over time, as Im not a board level radio tech and its going to
be a learning experience...shrug


* *What kinds of issues?

Tube radio would be fine, but something a bit more easy to operate
would be far better for me. IE..digital freq display etc etc or the
ability to add one...


Thanks for pondering on it.


* *What bands are you interested in? 160/80/40/20/15/10/6/2 Meters
432/1296 MHz 10.5 GHz? *Modes? CW/AM/SSB/FM/ATV? Power level?

* *There are a bunch of news:rec.radio.amateur newsgroups that would
have a lot more help for you. *Just be ready to kill file a couple dozen
ass hats.

--

Politicians should only get paid if the budget is balanced, and there is
enough left over to pay them.

* *Sometimes Friday is just the fifth Monday of the week.



How soon before Wieber claims he's louder than this guy on 80 meters?

http://www.smeter.net/7j4aal/antennas.php