On Sun, 17 Mar 2013 14:20:23 -0500, Ignoramus19014
wrote:

On 2013-03-17, Gunner wrote:
On Sun, 17 Mar 2013 12:00:53 -0600, "Pete C."
wrote:


Ignoramus19014 wrote:

My another guess is that disassembly and rigging, will take 4 days.

Since this equipment will never be put into operation as-is again,
assuming it's ok with the place you're removing it from, don't be afraid
to separate sections with a big abrasive cutoff saw or for tighter areas
an angle grinder with a cutoff wheel. Keep a fire extinguisher nearby,
but that will be the fastest way to get through mixed materials and get
on with the loading. Sawzalls are good too, but an abrasive wheel will
beat them for time on most materials.


Good suggestions. Followed of course by a Blue Point Wrench.

This is definitely torch and chopsaw territory!

i

Got yourself a nice plasma cutter yet? Might be a good job for one.

Gunner

The methodology of the left has always been:

1. Lie
2. Repeat the lie as many times as possible
3. Have as many people repeat the lie as often as possible
4. Eventually, the uninformed believe the lie
5. The lie will then be made into some form oflaw
6. Then everyone must conform to the lie