On Mon, 4 Mar 2013 18:21:58 -0800 (PST), "
wrote:

On Mar 4, 8:30*pm, John B. wrote:




Assuming that you are using the sizer die as designed - pushing the
bullet all the way through it - the sized bullet will be the diameter
of the smallest portion of the die.


Cheers,

John B.


That was my thought. I have never done any sizing, but my
understanding was that the bullet went thru the die. As long as that
is the case , taper in the die should not matter.


Dan

On the Star sizer..the bullet is pushed through. On most other
types..the bullet is pushed into the die against an adjustable depth
stop..and then pushed back out the way it went in.

Gunner

The methodology of the left has always been:

1. Lie
2. Repeat the lie as many times as possible
3. Have as many people repeat the lie as often as possible
4. Eventually, the uninformed believe the lie
5. The lie will then be made into some form oflaw
6. Then everyone must conform to the lie