On Tue, 26 Feb 2013 20:16:57 -0500, wrote:

On Tue, 26 Feb 2013 16:04:31 -0800, Gunner
wrote:

On Tue, 26 Feb 2013 17:10:39 -0500, Ed Huntress
wrote:

On Tue, 26 Feb 2013 22:03:19 +0000 (UTC), Eli the Bearded
wrote:

The discussion about sharpening taps in the "old taps and dies, worth
anything?" thread brings to mind a question of mine.

I've got a couple of old planetary style pencil sharpeners which tend
to chew up pencils and leave the wood all rough. I'm wondering if this
is a case of the blades needing sharpening or something else.

I know how to take the sharpeners apart, but I don't know how I'd go
about sharpening the many small curved blades on the cylinders.

Suggestions?

Elijah
------
mostly sharpens pencils with a utility knife these days

The standard way is to take a strip of fine emery cloth, wrap it
around the cutters, holding the ends of the strip in one hand, and
crank the sharpener with the other.

It sort of works. You now have a zero-rake pencil sharpener, but if it
was really dull, you had a negative-rake pencil sharpener before
sharpening it.

I've done it. It's Ok, but not great. Anything else requires a tool
grinder as big as a dishwasher.


And tiny tiny little wheels. Both in diameter and in thickness.


The methodology of the left has always been:

1. Lie
2. Repeat the lie as many times as possible
3. Have as many people repeat the lie as often as possible
4. Eventually, the uninformed believe the lie
5. The lie will then be made into some form oflaw
6. Then everyone must conform to the lie
Somewhere around here I have a spare set of cutters for the old
"Boston" sharpener that came out of an abandonned school. It was
probably left because the celuloid strip forming the curved part of
the shaving container had disintegrated (easily replaced, it just
snaps into place) the cutters were in the back of the cabinet to which
the sharpener was attached.
---

Gerry :-)}
London,Canada

One of mine is like that..over a 5 gallon bucket. Works fine.

Gunner

The methodology of the left has always been:

1. Lie
2. Repeat the lie as many times as possible
3. Have as many people repeat the lie as often as possible
4. Eventually, the uninformed believe the lie
5. The lie will then be made into some form oflaw
6. Then everyone must conform to the lie