You're probably fine. I've found that sometimes a squirt of WD-40 into the
valve, and then wiggle the valve stem a little, with the tip of a straight
pin, and it seals right up. No worries.
Christopher A. Young
Learn more about Jesus
www.lds.org
..
"George Herold" wrote in message
...
Thanks guys, (Steve, Stormin, and Bruce) I bought my small (14 oz ?)
bottle of mapp gas over ten years ago. I don't do much soldering
anymore, and then mostly just air and propane, but every once in a
while I need more heat for a job. And the mapp is there as back up.
George H.