View Single Post
  #18   Report Post  
Posted to rec.crafts.metalworking
Gunner[_7_] Gunner[_7_] is offline
external usenet poster
 
Posts: 1,346
Default Rusted diesel motor pulleys

On Tue, 11 Dec 2012 16:53:47 -0600, Ignoramus19474
wrote:

OK, one of these trucks works, starts and runs.


Does it run well? Or simply "runs"?


i

On 2012-12-11, Larry Jaques wrote:
On Mon, 10 Dec 2012 21:40:06 -0600, Ignoramus26227
wrote:

We bought two Chevy Kodiak dump trucks, with large stainless salt
spreaders, from CTA (Chicago Transit Authority). Both trucks are
equipped with Caterpillar 3116 diesels, snow plow mounts, hydraulic
PTO, and stainless hydraulic salt spreaders.

Three things sweeten this deal:

*) The stainless salt spreaders will probably pay for the purchase
*) They have almost brand new Bridgestone 11R22.5 truck tires, same as
our semi tractor, where the tires are very worn
*) One truck has 9,998 miles (true) and the other has a little under
15,000 miles. I believe this, because they belonged to CTA and they
would not mess with odometers.


Cool, 'cept for them being Chebbies. I'm a Ford and IH man.


We have no idea whether they can even run.


Not cool.


The trucks, though, are not without problems. They clearly sat around
for years. The biggest problem is that there is a lot of rust on the
main belt pulleys. So much rust that I am afraid to even try to run
these engines, as the rust may shred the rubber belts.

Is there any "easy" trick to clean that rust on the pulleys off,
without taking the engine out?


A straight wire brush will remove the worst of it (about 80%) in a few
minutes. (Well, it does in all the dry climates I've lived in, and up
here in So. OR. I guess I have no idea about wet, salty climates like
yours. blink of realization)

Brush, blow off, crank the engine a hair, repeat. The rest will rub
off in a few minutes of running.


We need to find -jobs- for our CONgresscritters!
-- Larry Jaques


The methodology of the left has always been:

1. Lie
2. Repeat the lie as many times as possible
3. Have as many people repeat the lie as often as possible
4. Eventually, the uninformed believe the lie
5. The lie will then be made into some form oflaw
6. Then everyone must conform to the lie