Bill,
I used the information at:
http://wiki.altium.com/display/ADOH/...ssion+Protocol
to build a model for the remote control, and it sends that bit stream
in the sim I've attached.
I've also simulated the circuit you mentioned using a variable modulus
counter and a shift register and latch to grab and store the data.
I don't have an HC595 SPICE model so I used '164's and '273's instead.
It looks like everything works well, but the sim is very slow... it
takes a few hours to get to finally latch the 12 bits.
Just for fun I drew a schematic showing the '595's and it's attached
as well.
If you're actually going to build this thing, there are quite a few 16
bit constant-current shift-register-latch-LED drivers out there you
could substitute for the '595's.
Enjoy!
--
JF