"Retired" wrote in message
...
On 7/12/12 12:32 AM, Steve B wrote:
wrote in message
...
On 7/11/12 11:10 PM, Steve B wrote:
I got a nearly new large swamp cooler today for $25. It needs new
pads,
and
has slight corrosion inside, nothing deep nor penetrating. The rest of
the
paint throughout looks very good. It has a one horse two speed motor,
and
is downdraft.

What type of paint would I buy to cover up the corroded spots? I have
already gone over them with an electric grinder with a cup knot brush,
and
have the corrosion and flaking paint cleaned off. Do they make special
concoctions for swamp coolers?

Steve



Lowes, etc sells paint specifically for coolers. The same or similar to
this Amazon listing

http://www.amazon.com/Dial-5623-12OZ.../dp/B000VS4T1W

While you are at it, I would suggest you re-seal the pan with the sealer
also made for coolers by same mfr.

http://www.simsupply.com/p-71361-qua...AID=1303478794

Might I just use the second product and skip the first? It has a really
(!)
thick coating of white sealer on it from the factory already. Someone
butyled over the drain hole, though. It was mounted on a flat surface,
so I
guess they cut it off for that reason. I will have to have a closer
look,
and possibly replace the drain hole. If I do that, I will definitely use
the second product, as the first looks like it is just for surface
painting.

Thanks for the links.

Steve

Did the cooler come with the parts for the drain ?? If not, then be aware
it is not normally just a plug. On the underside it serves as a connection
for a garden hose, and inside it serves as an overflow, by way of a short
pipe (~4", plastic)

Scroll down this page for a picture
http://www.kennspenns.com/coolerparts/misc-parts.html

Yes, I have seen them with the short tube for an overflow. Obviously this
one was defeated, and a custom angle flashing was put around the bottom to
mount it to a perfectly flat surface at one time. The place where the
plug/overflow would have gone is now a big round dollop of butyl. Now, I
remember that this was an overflow, too. It's been a long time since I
fiddled with swampers. Every spring, it was my job to clean up two of them
and get them ready for the hot Nevada summers. I hated the job, as the hard
water made them full of white crud, and over the winter, the pads
fossilized.

Steve