On 7/2/2012 8:22 AM, Victor H. wrote:
My Delta Unisaw has been working fine for fifteen years. Now all of
sudden when I push the start button the motors spins very slowly
tiring to get up to speed, but does not and after about five seconds
trips the breaker. I suspect one of the two capacitors. Could it be
anything else? Thanks.


First three rules in troubleshooting anything that runs on electricity:

1. Check the voltage
2. Check the voltage
3. Check the volage

Rare, but making sure your circuit breaker, cord, wall outlet, etc. has
not given up the ghost, _first_, could cut out a lot of tail chasing.

--
www.eWoodShop.com
Last update: 4/15/2010
KarlCaillouet@ (the obvious)
http://gplus.to/eWoodShop