DIYbanter - View Single Post - Lawn Mower

83LowRider

hr(bob) wrote:

You can make a shorting switch out of an old tin can, a tinnersnips,
and a small drill. Cut the can into a piece of metal 1,inch wide by
about 5-6 inches long. Drill a hole in one end to put a cylinder head
bolt thru. Remove one of the cylinder head bolts, put the bolt thru
the metal piece, and replace the bolt. Bend the metal piece so you
can short out the spark plug with your foot, and go cut your lawn.

Very true... but if one is too lazy, they can always spend
about three bucks for one.

http://www.mister-solutions.co.uk/pr...nmower-61120-p