peasant wrote:

Asko D1796 Pump will not switch off. This problem is not listed in
trouble shooting guide.




It's possible the fix for your problem is beyond you.

I am not trying to be sarcastic but, if you come here looking for
help and all you did was read the trouble shooting guide, we can
assume something electrically is wrong.

On the electrical side, it could be a simple problem, like a welded
shut contact in the relay that operates this pump. For this, you need
to traced the pump wires back to see where they are connected. If you
have more than 2 wires, minus a ground, going to this pump, it could
have and integrated switch that only requires low voltage to turn it on.

And then again, it could be something a little more serious, like the
control board, which could have a solid state device driving it.

I don't know if you have a water level switch in that unit but, it
could have something stuck in it and the pump may think there is still
water in it or, it could have a pressure switch and that is stuck on.

Jamie