On 3/19/2012 3:21 PM, Robatoy wrote:
On Mar 19, 6:05 pm, wrote:
Greg Guarino wrote:
I added some oak trim to some black melamine shelves a few years ago,
using some sort of glue, maybe it was Titebond. Hey, it stuck for a
while. But then the weight of the stuff my daughter put on the shelves
made the shelves want to bow a bit; the oak trim was not as pliable.

It's funny in retrospect that people here recommend using pieces of
melamine with clamps while gluing up a project, specifically for its
"glue-repelling" qualities. Oh well.

What should I use this time?

You used the oak on the edges? If so, you need to either make shorter or
stiffer shelves or afix the trim mechanically as well as with glue. By
"mechanically" I mean screws or dowels/biscuits.

If you were trying to stick the wood to the melamine surface and not the
edge then you need to remove the melamine where the wood is going to go - I
use a router - and then glue normally.

There is a glue supposedly made to glue to melamine, never used it, no idea
if good or bad. Regular glue *does* stick to it, just not well.

--

dadiOH
____________________________

dadiOH's dandies v3.06...
...a help file of info about MP3s, recording from
LP/cassette and tips& tricks on this and that.
Get it athttp://mysite.verizon.net/xico

So-called Melamine glue does work, just not well. Only a tad better
than regular glue.
Sortakinda like aluminum solder..works..kinda.

i wonder if vhb tape would work. i've never been able to get it off
anything without cutting it off.