View Single Post
  #6   Report Post  
Posted to sci.electronics.repair
N_Cook N_Cook is offline
external usenet poster
 
Posts: 5,247
Default To go along with previous post about LG Optimus Damaged PCB

Franc Zabkar wrote in message
...
On Sat, 10 Mar 2012 12:11:16 -0800 (PST), "Rude Co."
put finger to keyboard and composed:

Rude Co. wrote:
Heres the photo link of the damaged PCB in question. Notice the upper
right side behind charger port. Ive already removed the burned out
diode and laid it along the power rail in the photo. What are the
components near to that area and can I bridge anything to get it back
working again? photo link is

http://www.flickr.com/#/photos/77872404@N08

correction...... photo is located at http://www.flickr.com/photos/rudeco,
sorry for the mishap.


Here is a direct link to your photo (no ads, banners, popups, etc):
http://farm8.staticflickr.com/7040/6...c9554088_b.jpg

Unfortunately I can't make out any of the part markings.



If your camera doesn't have a macro function, then sometimes a scan
will produce a better result.

Otherwise, can you determine where the diode's pads connect to? In
particular, which pins of the charger port, if any, connect to the
diode?

Your "charger port" looks like a micro-USB socket:
http://pinoutsguide.com/Slots/USB_pinout.shtml
http://pinouts.ru/CellularPhones-A-N...b_pinout.shtml

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.



Or use a magnifying glass and spacer tube and a few test shots to get to
know the focus range.