Thread
:
Metal bandsaw tracking
View Single Post
#
7
Posted to rec.crafts.metalworking
Snag[_3_]
external usenet poster
Posts: 648
Metal bandsaw tracking
wrote:
I have a cheap 4x6 band saw which I bought on sale from Busy Bee and
which came with a Harbor-Freight manual. I have also downloaded a
Grizzly manual for their equivalent saw.
I am having a persistent problem with tracking of the blade on the
lower (driven) wheel: the blade runs about 2/3rds on the wheel. I have
re-done the tracking procedure on the top wheel where it is
satisfactory. I have tried different tensions. If I move the blade
manually *backwards* by rotating the pulleys the blade slots in fine,
right next to the shoulder. If I move it forward, manually or by the
motor, it goes back to its previous position.
Michael Koblic,
Campbell River, BC
There's a 4X6 bandsaw group on Yahoo . There's a lot of info in the
archives , and if you can't find the answer there someone on the group
likely has the answer to your problem .
--
Snag
Learning keeps
you young !
Reply With Quote
Snag[_3_]
View Public Profile
Find all posts by Snag[_3_]