On Jan 3, 5:24*am, "David Looser" wrote:
"Eiron" wrote in message

...



Can I just mention another example of European Union lunacy?
Voltage is standardized at 230v +- a fudge factor so that the UK
can keep to 240v and the rest of Europe can keep 220v with no plans
for any country to adopt 230v. Now that is dumb!

I'm not sure it is so dumb
There always was a tolerance range on the UK 240V mains, what happened was
that these tolerance limits were widened and re-centred on 230V. But these
new limits are now EU-wide so any equipment manufactured to these new limits
(230V +/- 10%) is suitable for sale anywhere within the EU.

And the UK plugs are rather large. That would be a valid criticism.
It spoils the lines of a laptop bag....

I agree, the BS1363 plug is not my favourite design. Some years ago there
was a serious attempt to introduce a EU standard plug & socket, an attempt
that failed because of the NIH (not-invented-here) factor. I rather like the
German 'Shucko' socket and would be happy to see it replace the BS1363
socket here, but can you image the reaction of the Daily Mail readers? :-)

That or the Australian socket would be my choice, or one of the 220
NEMA sockets.

If you are going to build "valve" equipment for the world market you
need a winding scheme on the PT that gives bogey filament voltages at
220, 230 and 240 volts and, I understand that in Australia 250 vac is
not uncommon in practice.

In Britain one may readily obtain a "site transformer" which will
give what is advertised as 110 volt balanced power. I haven't been
there in 20+ years, can any Brits tell me if that's really true or if
120, or more, or less, is actually common? They are used for electric
drills and whatnot outdoors. Vintage US gear works fine at 110, but
mostly not current stuff.