On Nov 12, 5:15 pm, "ARWadsworth"
wrote:
Jim K wrote:
On Nov 12, 4:46 pm, "ARWadsworth"
wrote:
Jim K wrote:
poetically enough just a few days after the thread on oven fan
element replacement w tripping RCDs etc but oven still working
except no heat - mine has just killed itself as it turned on to
finish a fine stew for my tea ;(((

I suspect the fan element (again) as all was normal til the "power
up" of the element part of the turn on sequence (i.e. after
selecting oven mode and temp) then - dead.
No rcd trip, no MCB trip, no display, clock etc now all dead. ;(((

In the other thread someone mentioned their element going and also
an internal fuse being blown - got the back and top off mine and
only one fuse I can see on the control PCB - looks very (too?)
small & visibly fine - where else might I find the culprit of the
death?

(If I can resurrect it I can cook me stew on another mode til I get
the suspect element replaced...)

A dead PCB/no clock etc will stop the oven from working. It could be
the PCB fuse or the connections to the PCB that are loose.

--
Adam

Hiya
PCB fuse has 240v either side via me multimeter...

240V potential measused against what?

erm... the earthed casing

Jim K