On Thu, 29 Sep 2011 17:08:20 -0400, Greg Guarino
wrote:
On 9/29/2011 3:24 PM, CW wrote:
It will chip out more but the chip out will be on the bottom. The
overall finish will be worse though.
I'll stick with the shallower cut then.
CW needs a new blade with more than 3 teeth left on it. Don't listen
to him.
A layer of masking tape on both sides will keep chipping to a minimum.
Peel the freshly-cut-in-half tape off -toward- the cut to keep from
pulling chips up. Now seal that bottom WELL so it can't absorb water!
--
Win first, Fight later.
--martial principle of the Samurai