On 9/6/2011 2:40 PM, Leon wrote:
On 9/3/2011 3:40 PM, Bill wrote:
Am try to install new garbage disposal and have a quick electrical
quesiton.
GD Unit came with (3-prong) electrical cord attached. Unfortunately the
cord does not seem to be removable. Can I cut off the plug and attach
this to the romex in my junction box? I suspect the answer is no, but I
have to ask. If this is not acceptable, I think the next solution is to
install a new electrical outlet under the sink...
BTW, whoever installed the last one wasn't too A-R about it: there were
no "romex connectors" going into the junction box, coming out the
junction box, or going into the garbage disposal unit. *Scotch tape* was
used to cover the sharp edges on the knock-outs on the junction
box.... : (
Thank you,
Bill
Glad you weren't looking for a quick answer! LOL
Hell, he got the correct answer on the second _reply_ at 4:46 PM.
Nothing further was needed on the original question ... and for the GFCI
question, eleven minutes later at 4:57 PM.
http://www.craftkb.com/Uwe/Threads/L...trial-Question
Everything since is either echoes, or noise.
--
www.e-woodshop.net
Last update: 4/15/2010
KarlC@ (the obvious)