View Single Post
  #11   Report Post  
Posted to rec.woodworking
Robatoy[_2_] Robatoy[_2_] is offline
external usenet poster
 
Posts: 6,062
Default Quick Electrial Question

On Sep 3, 4:40*pm, Bill wrote:
Am try to install new garbage disposal and have a quick electrical quesiton.

GD Unit came with (3-prong) electrical cord attached. *Unfortunately the
cord does not seem to be removable. *Can I cut off the plug and attach
this to the romex in my junction box? *I suspect the answer is no, but I
have to ask. *If this is not acceptable, I think the next solution is to
install a new electrical outlet under the sink...

BTW, whoever installed the last one wasn't too A-R about it: there were
no "romex connectors" going into the junction box, coming out the
junction box, or going into the garbage disposal unit. **Scotch tape*
was used to cover the sharp edges on the knock-outs on the junction
box.... *: (

Thank you,
Bill


Put a receptacle under the sink, GFI if you want. Operate the GD with
a pneumatic switch which I bought from HD....on the same shelf as the
GD's.
The switch mounts in the countertop (3/4" hole, IIRC) next to the
tap... handy as a pocket on a shirt....as a bag of chips?....