On 07/29/11 11:25 pm, Smitty Two wrote:
http://greatnecktools.com/products/show/TH6M
You *do* realize that only the square tip of the tap goes in that tap
handle, right?
Even the 8mm tap is barely gripped securely enough for use if I insert
only the square tip. There is an internal "step" in the handle (IOW,
there is a reduced diameter further in), and if the 7mm and 8mm taps are
inserted far enough that they are gripped by that reduced-diameter
section they are usable; the 6mm one is not,
Perce