AL spoolgun stuck on high
On Thu, 04 Aug 2011 21:38:57 -0700, Winston
wrote:
Karl Townsend wrote:
Thanks DoN and Winston. I'll check all this out.
Please keep us posted, Karl.
--Winston
VICTORY!!!
Well, sort of. The female amphenol plug is the loose connection. I ran
a drill bit in/out to remove swarf and dirt. Then sprayed BrakeKleen.
Put plug on real tight. It works. My solution for now will be to put a
bracket on the side of the welder to hold all the spoolgun cable. Then
never take the connection apart again.
Failing that, I'll hire somebody to re-solder on a new amphenol plug.
Karl
|