View Single Post
  #2   Report Post  
Posted to rec.crafts.metalworking
Michael A. Terrell Michael A. Terrell is offline
external usenet poster
 
Posts: 12,924
Default Container cooling


Steve B wrote:

I'm currently putting trusses across two containers 16' apart. Each
container is 8' wide with a 16' space between. 40' long. Trusses are 32'
long to allow a rain overhang. It is sloped with no peak. Total sf is
1280.

My intent was to take the sun load off the top of the containers. There
will also be double doors on each end of the space to be able to enclose the
space between from our vicious winds. I will put a swamp cooler in each
container.

I was wondering if I put a recirculating water pump to flow water over the
roof and outside vertical east and west sides if that would cool it very
much. I'm probably going to have to just try it. I get ag water, so
there's no problem about added cost.

Anyone ever done this?



I've seen old metal roofed mobil homes with a couple soaker hoses on
the roof to cool them down. The downside was the constant water flow
down the sides washed away the paint, leaving bare aluminum.


--
It's easy to think outside the box, when you have a cutting torch.