On Thu, 07 Jul 2011 11:29:08 -0400, wrote:

Hello,
I have a desire to backup my refrigerator during power outages. Let's
say I buy a generator with sufficient power to do so. A whole house
transfer switch is not appropriate because the small generator is
nowhere near big enough to handle the whole house. The cord on the
refrigerator is very hard to get to because the refrigerator is built
in. If I were to run the 12-2 line that currently runs from the
outlet to the breaker box into a new box containing a SPDT switch and
wire it to connect the hot wire from the outlet to either the original
breaker or a heavy duty extension cord plugged into the generator,
would that meet code? (By code, I mean NEC, not local variations. I
don't want to ask a local inspector if the answer is going to be "no
way".)

If the above is not acceptable, how about cutting the line running to
the refrigerator outlet and then installing an outlet near the breaker
box and a plug to connect them back together? During a power outage,
I would remove the plug from the outlet and plug it into the extension
cord coming from the generator. Would having a plug and outlet in the
line violate code?

Here's a crude attempt at an ascii drawing (please view with a fixed
width font): == is 12-2 w gnd normal house wiring. -- is the
refrigerator cord plugged into the outlet behind the refrigerator.

Today:
Breaker-Box======================outletPlug-----Refrigerator

Idea #1:
Breaker-Box====SPDT-Switch=======outletPlug-----Refrigerator
||
||
||
Generator

Idea #2:
Breaker-Box===new-outletnew-plug====outletPlug-----Refrigerator


TIA for any advice,
Pat

The plug-in circuit would at least be safe