Sealing the lids on paint tins
On 7/6/2011 2:02 AM, Bill wrote:
Larry Jaques wrote:
On Tue, 5 Jul 2011 10:36:34 +0000 (UTC), "steve robinson"
wrote:
Huge wrote:
On 2011-07-05, Dave Plowman wrote:
In ,
steve wrote:
The reason paint goes off after being opened and used is the
large quantity of new air when you replace the lid.
Your better dropping a peace of plastic in the bottom
Or fill the space with some inert gas?
Store the tins upside down.
Makes no difference once the tin is opened and new air introduced.
Just make sure you use a paint strainer after opening a can the second
time.
This reminds of a question I did not quickly locate the answer to on the
web. I have never bought bought paint in greater than 1 gallon units.
They are easy to shake and pour into paint trays, etc. What is the usual
process for using a *5 gallon* container of paint? I assume it has to be
mixed really well (practical to do by hand?) and that a "paint ladle" of
some sort would be handy.
Bill
The 5 gallons get mixed if you pick a non stock color, but we get them
shook regardless. You pour out of them just as you would a 1 gallon
container, you just have to be more careful and have a paint brush handy
to clean up the drips down the sides. The biggest problem with the 5
gallon buckets is getting the lid off. A 5 in 1 comes in handy for
that. also consider switching from a roller tray to a roller bucket.
With the waste basket style paint buckets for rollers you can easily
dump a gallon of paint into them and not waste time refilling all day
long. We typically refill our roller paint buckets a couple times a day
maybe three times on a long day. Plus they are much easier to carry around.
|