On May 30, 5:50*pm, Metspitzer wrote:
Do they make a circuit breaker panel that will mount in an old fuse
box? *I have a friend that wants to get an old house ready to rent.
The house is small but it is really nice. *Here are two pictures of
the fuse box. *It has a GE cover that is listed at 150A. *The box
measures 14.5 by 24 by 3.75. *No markings on the service entrance
cable that tells what size the wire is.

He wants to just remove the old guts and update it to circuit
breakers. *The bottom left fuse block is hot on both sides even with
the fuses removed. *In the extreme lower left there is a fuse block
that is not being used.

Since he is an old friend, *I offered to have a look at it for him,
but I really don't know what to tell him short of tearing the house
down and start from scratch. *I know that is not what he wants to
hear. *The insulation on the wire looks so brittle I don't want to
touch it. *The house is in rural Georgia.

http://imgur.com/NP8xV&UucADhttp://i...m/NP8xV&UucADl

--
O'Neil to General Hammond:
For the record Sir, I wanted to blow it the hell up.

BESIDES UPGRADING THAT PANEL WILL ONLY BE A TEMPORARY REMEDY.
I WOULDNT RISK MY WORSE ENEMIES LIFE ON SUCH A RENTAL, IF HE DARED TO
RENT IT FROM ME.
I DO HAVE STANDARDS......TELL HIM OT NEEDS TO BE TAKEN IT ALL OUT ..
AND TO STOP BEING SUCH A SLUM LORD - A CHEAP A$$ FIX JUST WONT DO.

PAT ECUM
TGITM

ECTO- ELECTRICIAN TO THE STARS.
BOOWAHAHAHAHAHA
NO FOR REAL, DONT MESS WITH THAT...TEAR IT OUT AND DONATE IT TO A
HOMELAND MUSEUM.