"MM" wrote in message
...
On Thu, 21 Apr 2011 13:33:44 +0100, "SRT" wrote:

Hi,
As in header. I have a Haws traditional can that's just about 2 years old
(birthday present)
Unfortunately I noticed the centre of the base had pushed out causing it
to
rock around ( maybe frost?)
so I tapped it back into line and now see a slight weep/leak from the
welding around the base
Any ideas as to best way if any to repair?
Thanks.
Stuart.

A bead of butyl sealant around the joint from the inside