Thread
:
install a 2-lamp fixture in place of a 1-lamp fixture?
View Single Post
#
1
Posted to alt.home.repair
Red Green
external usenet poster
Posts: 4,946
install a 2-lamp fixture in place of a 1-lamp fixture?
Smitty Two wrote in
news
In article .com,
(GOODCHICK) wrote:
hi
i am a homeowner shopping for light fixtures that i will have
installed. i have not yet decided on the installer.
This is a DIY group, not HSN.
i have 3 ceiling light fixtures that i dislike.
Your wife uses them for sex toys.
they are all the same and
are in the den, hallway & bathroom; they are 1 lamp units. all of the
fixtures that i like have 2 lamps. can i install a 2 lamp fixture in
place of a 1-lamp fixture?
No, you can't. You already stated that you'd be hiring the job out,
because you're too stupid to use a screwdriver.
is it going to cost a lot?
Yes. About $350 per fixture.
will i have to run \"2nd
lamp wiring?\" or, can i use existing wiring?
You aren't doing the job yourself, so why do you care? But to answer
your question, if the insulation on the wire is labeled "this ****
will work for two lamps, Maynard" then you're good to go.
OR do you know of any sites that have attractive 1 lamp fixtures?
No. All the 1 lamp fixtures are butt ugly, like your sister.
thank you for your time.
You're welcome. Here is another tip: This is USENET, and you won't
actually see and profit from my wisdom, because the stinking
homeowner's hub doesn't like me.
Sparky, errrr....Smitty:
Can we get an NEC cite for your advice?
Thanks,
Curious Red
Reply With Quote
Red Green
View Public Profile
Find all posts by Red Green