Winston wrote:
Bob La Londe wrote:
(rehashing some old rcm topic names)

I used a cheap 3/4 drive socket today for "home" use. Also some EMT.
I need a 1 5/8 DEEEEEEEEEEEP socket to tighten up the drain
retention nut on the drain I put in one of the mini mill enclosures.

Had some el cheapo 3/4 drive sockets from somewhere. Cut one in half
and welded a piece of 2" EMT between the halves. Worked perfectly.

Attaboy, Bob!

--Winston

Bob isn't the first to come up with that idea , us Harley guys been using
one like that for years to get at the sprocket/front pulley nut on Big Twins
.. Mine's made with a piece of 2" pipe about 3" long . It was a pure bitch
cutting that socket in half on the lathe , burned a couple of HSS cutters
before I figgered out it was tempered steel .

--
Snag
Learning keeps
you young !