On Tue, 08 Mar 2011 10:36:44 -0800, GARY wrote:

No error-code.

After the 3 discs are cycled over the lens, the display says "No Disc".

You've got problems in the logic portion. If it were a laser problem the
disc would rotate and the sled would slide the laser block in and out
looking for a disc ID. A logic failure might mean a total failure of
this initialization procedure. There may be a small switch or optical
sensor telling the logic control that there are discs loaded. I think I
would start there given the symptoms.



--
Live Fast, Die Young and Leave a Pretty Corpse