On 01/15/2011 11:16 PM, Winston wrote:
Tim Wescott wrote:

Rustoleum spray-bomb should work fine. Use their metal primer first,
then the color(s) of your choice. You _can_ do a good job with spray-can
paint, but not the first time you try.

Surface prep is Critical.

Clean! No dirt. Minimize surface oxides.

Degreased! Use lots of paint thinner to eliminate
finger oil for example. Change application cloths
often so that you don't simply smear grease around.

I would scrub everything in lots of hot water and strong detergent, and
then wear rubber gloves afterward to protect the part from finger
grease. Solvent is nice as a last step, but it takes lots and lots of
it to remove large amounts of grease.

--

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com

Do you need to implement control loops in software?
"Applied Control Theory for Embedded Systems" was written for you.
See details at http://www.wescottdesign.com/actfes/actfes.html