Thread
:
Name That Tool
View Single Post
#
70
Posted to rec.crafts.metalworking
Winston
external usenet poster
Posts: 3,444
Name That Tool
wrote:
On Fri, 31 Dec 2010 13:02:20 -0800,
wrote:
Its not rocket science. I did 45 or there abouts a couple years ago,
but I used my forklift as lifting power. Took me about an hour and a
half total, simply lining up, driving to the next one, etc etc.
A forklift. Bliss!
They get bogged.
I use my Yanmar B13 excavator for lifting.
Most recent job was loading 67 limestone blocks on my trailer.
The hard part was that they had to be loaded under a carport which
was slightly higher than the excavator cab roof, boom would have hit
it at full height.
The blocks were 1 metre x 450 mm x 350 mm and really made the
excavator grunt, especially with the boom fully extended to load the
far side of the trailer. Original weight guesstimate was about 150
kg, revised version was 220+.
And could have been upwards of 380 kg! Dayum.
http://www.natural-stone.com/limestone.html
--Winston
Reply With Quote
Winston
View Public Profile
Find all posts by Winston