How Do You "TIN" a soldering iron?
On Nov 29, 12:26*am, wrote:
How do you know when your soldering iron is tinned?
I keep mine plugged in *for 5-10 minutes then when I try tin it, the
solder beads up and just drips offs. *It doesn't seem to "wet" the
tip.
Is it suppose to wet the tip of the soldering iron?
I'm using non lead solder, 95%Sn, 5% Sb (Tin/Antimony).
Rosin core.
Also, when 1 solder two wires together, I twist the wires together,
then hold the iron to one side of the wire and hold the solder to the
opposite site. *The wire should get hot and soak up the solder, right?
I've been practicing but it seems to be hit or miss so far.
Bonnie
SIMPLE ENOUGH....ALL THE HYPE IS SIMPLY MARVELOUS....
CLEAN THE TIP OFF WITH STEEL WOOL, THEN APPLY SOME LIQUID FLUX
LIGHTLY, FOLLOWED BY SOLDER AND WALLAH!
IT IS TINNED...A CHILD CAN DO IT, NO NEED FOR 100+ RESPONSES TO GET
THAT.
PATECUM
|