On 2010-11-19, John wrote:
[ ... ]
Sometimes you can break the cap screw loose with a chisel and hammer.
Phillips screws can easily get screwed up by using a worn screwdriver or
the wrong size screw driver.
A common problem -- because the right size Phillips driver
*looks* too big. If you can't train people to feel for minimum slack in
the fit of the bit to the screw slot, you will have a lot of munged
heads and bits.
Enjoy,
DoN.
--
Remove oil spill source from e-mail
Email: | Voice (all times): (703) 938-4564
(too) near Washington D.C. |
http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---