"Larry Jaques" wrote in message
...
On Sat, 23 Oct 2010 17:14:14 -0500, "Leon"
wrote:

I haven't yet used one (plugged in) so I can't tell you from
experience. But if you're hanging the motor off the edge of the rail,
I'd think you'd want both clamps for the rail and a catch on the saw
to keep it more steady. shrug

At a steep bevel angle the saw will lift off of the sled, IF you let go.
Under normal operating conditions it has no suprises.

OK. It had appeared to be a useful function...and may be to someone
else.


It probably is a good idea, but not a necessary one.