On 2010-10-24, Steve Lusardi wrote:
Please rethink your alignment procedure. I don't know the centerline offset between the bore and the scope, but if intersection
occurs at 21', you will be very high at 50 yds. Do the arithmetic.
Steve

"Ignoramus22870" wrote in message ...
On 2010-10-24, Wes wrote:
Ignoramus22870 wrote:

An adjustment of 1/4" MOA means 1/4 inch per click at 100 yards. 12
feet is 4 yards, so one click means 1/4*4/100 = 0.01 inch. So, to
adjust the point of impact by this much, I would need to adjust the
scope by 100 clicks?

Sounds right. Did you mount the rings in line with the bore centerline.

Wes, yes, I think so. Anyway, I have adjusted it enough, so that it is
completely dead on.


I adjust for vertical by simply aiming 1.5 inches higher, to account
that the scope axis is 1.5 inches above the barrel. This is what I
mean by dead on.

i