In article , "john hamilton" wrote:
I have to connect this AAA battery holder to a toy. Although I have a small
soldering iron, my soldering skills are poor. I can see myself easily
melting all the plastic around the contacts before I can get anything to
stick to the tabs. (The part of the tabs with the small hole will bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the holes in the
connection tabs twist and then apply some nail varnish to stop it unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I would be
gratefull. Thanks.

Considering that a good solder joint has good mechanical connection
your method should would work fine, but you should use quick epoxy instead.
The slow epoxy is best however.

greg