"Ignoramus30661" wrote in message
...
Bought a new Saitek P880 joypad at a garage sale ($2).

Looks like this

http://ef.algebra.com/e/220652673897


Ordinarily it would not be metalworking related, but I will put it on
my Bridgeport mill.

This guy here posted his configs using the same Saitek joypad on his mill:

http://wiki.linuxcnc.org/emcinfo.pl?...ds_With_E MC2

I also removed and threw out a lot of unused wiring from the mill, it
makes the cabinet look a little more user friendly inside. Still some
left, going from pendant to the cabinet.


Here's another type of jogging pad that you might want to consider:

http://www.tormach.com/document_libr...Controller.pdf

It's based on a standard game pad controller, but has been marked by Tormach
for the axis and step functions. In Tormach's implementation for a Mach3
controller, clicking on one of the axis keys selects that axis. Rotating
the outer ring moves the axis continuously in the + or - direction with the
jog speed increasing the more the ring is rotated. The ring is spring
loaded so it snaps back to position once relased. The inner disk with the
finger depression moves the axis in increments of 0.0001" to 0.1". The Step
keys toggles up and down the range of increments. It works pretty slick on
my Tormach. You can probably find the generic OEM version cheaper, but I
like having the functions labeled.