View Single Post
  #2   Report Post  
Posted to rec.woodworking
Kevin(Bluey) Kevin(Bluey) is offline
external usenet poster
 
Posts: 126
Default Hair Drill Warning

On 7/9/2010 2:21 PM, Hoosierpopi wrote:
Using one of those 24" drill bits (from HFT) to drill a hole through
three pieces of material while standing on a ladder I felt something.

I kept on going and drilled the first eight-inch hole, drove in the
bolt and tightened it up before proceeding to drill the hole for the
second bolt.

This time, I turned my head to sight down the bit to make sure I
drilled a straight hole and really felt something.

My long hair had wrapped around the drill bit so tight that I actually
pulled a 2 x 3" patch of hair from my scalp!

Hurt like hell for a minute or so while my wife (glad she was there)
helped me reverse the bit, get off the ladder and extricate my head
from my electric drill.

Thought it was worth posting my wife's advice - "pull your hair back
and wrap it in a pony tail."




I'd cut the long hair off.
Least you could do is wear a cap and tuck your mop under it.
Long hair and rotating machinery are a very dangerous combination .
Your lucky it wasn't a gear driven pedestal drill .
I saw a guy have his scalp ripped clean off his head using a radial arm
tool room drill .
Made me sick in the guts.

--
Kevin (Bluey)
"I'm not young enough to know everything."