Followup USB malfunction ? / Ezbus digital mixer /Ez-usb USB chip
On Thu, 20 May 2010 14:17:20 +0100, "N_Cook" put
finger to keyboard and composed:
I got back to this today. Saved to disc the existing (corrupted ?) data in
the serial EEPROM and cut the SDA line to the Ez-usb chip.
The EZbus mixer is no longer "Becoming Ezbus" and a blank screen.
But windows recognises a USB device connected and by UVCView/USB view the
USB is working up to the USB chip , reading
---===Device Information===---
ConnectionStatus:
Current Config Value: 0x00 - Device Bus Speed: Full
Device Address: 0x00
Open Pipes: 0
*!*ERROR: No open pipes!
===Device Descriptor===
bLength: 0x12
bDescriptorType: 0x01
bcdUSB: 0x0100
bDeviceClass: 0xFF - This is a Vendor Specific Device
bDeviceSubClass: 0xFF
bDeviceProtocol: 0xFF
bMaxPacketSize0: 0x40 = (64) Bytes
idVendor: 0x0547idProduct:
0x2131
bcdDevice: 0x0004
iManufacturer: 0x00
iProduct: 0x00
iSerialNumber: 0x00
bNumConfigurations: 0x01
ie Cypress VID/PID
Where to now? presumably forcing a pipe somehow
You already know more about USB than I do. :-)
However, I wonder if the data in the serial EEPROM are checksummed, in
which case it may be possible to confirm its integrity.
ISTM that you've at least confirmed that the EZ-USB chip has sanity,
if you weren't already convinced by your scope tests.
- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
|