On Apr 29, 7:32*am, "Karl Townsend"
wrote:
I have sixty spots where I need to clamp a horizontal 7/8 conduit to a
vertical 7/8 conduit. Looking for a part to do this with no joy.
So far my best solution is to get two hole conduit wall clamps:http://www..mcmaster.com/#9439t43/=6vbf6c
And then make a 3"x3" metal plate. Bolt one tube to the plate with a clamp,
then bolt the other tube with another clamp.
I'm looking for an easier way that don't need four bolts , two clamps, and a
plate at each joint.
Karl
I usually see two of these bolted together, 2 clamps-1bolt
http://www.erico.com/products/CADDYc...ampswBolts.asp
http://www.gibsonstainless.com/stainless_straps.htm
and a back-to-back push-in style
http://www.erico.com/products/CADDYc...ttoConduit.asp
but it's not very low profile.
It may be hard to find the perfect clamp if the method is not code for
an electrical application.
Dave