On 3/30/2010 8:38 PM, Max wrote:

I like your suggestion but I think I would have a difficult time
implementing it.

I cheated with mine (and I didn't need a nine-footer) - I clamped a 4x8
sheet of 3/4" BB to my base board, slapped my 8' pre-drilled 3/4" angle
up against that, and screwed it down while holding the angle against the
plywood edge.

Then I unclamped the plywood and used my circular saw to trim the width
of the base board.

It's straight enough.

--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto/