On 3/15/2010 3:04 PM, Bill wrote:

Install 2P-30A branch c'bkr for each 240V stationary tool along with
a 2P-30A, non fused disconnect at (within 10ft) the tool.


Question: So this redundancy is a good idea for 240v tools, but is not
as important for ones powered at 120v (which are even more likely to be
powered by conventional outlets wired in a series)?

You really don't need to install a disconnect for a dedicated circuit to
each machine in your home shop.

Is your shop in a garage?

--
www.e-woodshop.net
Last update: 10/22/08
KarlC@ (the obvious)