View Single Post
  #8   Report Post  
Posted to sci.electronics.repair
N_Cook N_Cook is offline
external usenet poster
 
Posts: 5,247
Default HP Laptop power supply output plug

Colin Horsley wrote in message
news
"Colin Horsley" wrote in message
. au...

"N_Cook" wrote in message
...
Somewhat chewed up, seems to be 7.3mm outside diameter, 9.5mm deep, 5mm
inside diameter , about 0.5mm pin but tip recessed 5mm into body, would it
be recessed by as much as 5mm ?
Number on ps body
PP012L-E
WASHBOABMXWDR4

Laptop is with owner

__________________

It would be SO much easier to help you if we had the MODEL number!

Colin @ CATronics



Colin @ CATronics





COMPAQ - model #CQ60-307EA is the model in question

The minor, blue covered central lead , i think, was turned back within the
fill of the connector shroud, not connected to the pin, safer leaving
disconnected without any specific knowledge.
Just leaving the polarity of the 2 concentric cylinders taking the 4.74 amp
rating
Just looked at another known Compaq (Compaq Presario 2700EA) and DVM testing
the simple 2 way DC power connection , nothing on diode range.
no reading on R range one way
but other -2.8M on 30M range , DVM+ to known neagative and chassis ground
-260K on 3M range
and with another DVM
-6M on 20M range
-600K on 2M
-25K on 200K

how universal is that ? if not able to power up with current limited bench
power supply, monitoring voltage.