I have an Hitachi C10 FSH compound miter saw that has worked
beauitifully for me for a couple of years. Recently I allowed someone
else to use it and it is now out of whack. It burns almost every cut.
I am running a very sharp Forrest Woodmaster on it but to be certain
it was not a dull or warped blade causing the problem I changed blades
but the problem continues. I have been over the saw very carefully
and the only thing that appears a little out is the right side tubular
shaft on which it rolls has a tiny bit of slop. I do not believe this
is the source of the problem but I am at a loss and am turning to you,
my esteemed woodworking colleagues, to tell me if you have had this
problem and what your solution might have been. Yes. I know, I can
send it back to the factory but that should only be a last resort.
Thanks for any help you might be able to offer.

Joe