Whanna trade? Delta dial was accurate, easy to set up (lower the bit to
touch the wood, then dial in the depth from there and lock it in) and never
strayed from where I put it. Now I have the threaded rod on the bigger
Delta that doesn't take much pressure to get the stop to bypass the threads.

"Sweet Sawdust" wrote in message
...
Mine has a dial indicator and locking nut. I like the threaded rod and nut
a
lot better, harder to set up but stays put.
"Scott Wilson" wrote in message
om...
"Sweet Sawdust" wrote in message
...
Grizzly has a problem with the depth gauge, it will sometimes drift
from
the
depth you set it for (only a problem if you are doing large numbers of
holes) . The delta seems to have a good depth gauge. Otherwise I like
the
Grizzly better.

They may have changed the depth gauge since you bought yours. Mine has
a threaded rod on the left side. Once the nuts are tightened I don't
see how it would be a problem.

I like my grizzly a lot, and would recommend it for someone looking in
the $200 range.