On 1/14/2010 9:24 AM Ken Layton spake thus:

You have a "C-Frame Shaded Pole" motor. You will also need to measure
the thickness of the stack of the laminations as that is part of the
motor specs of shaded pole motors. Typical are 1/2", 5/8", 3/4", 7/8",
etc.

I wouldn't sweat the lamination thickness. If you find a motor that'll
fit, it'll work. This is a non-critical application.


--
You were wrong, and I'm man enough to admit it.

- a Usenet "apology"